Takaab Core & Plexus - Complete Eurorack Power Solution

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Takaab Core & Plexus - Complete Eurorack Power SolutionA complete power solution for eurorack synthesizers comprising of: 1x 2. 5A 15VAC line lump power supply 1x TAKAAB CORE + 12V regulator board 2x TAKAAB PLEXUS 14 way power bus boards 2x Interconnects (not pictured) 1x TAKAAB +5 voltage step down No fixing screws are supplied, but the boards are drilled for M3 screws and a minimum of 3mm standoff from the mounting surface is required. Specification: Max Output Current +12V: 1100mA Max Output Current

Check your module's instructions and if in doubt check with the manufacturer

currently all Voxmachina modules are built to order

but will turn back on only when as there is a gate/high signal on the jack and only for either the A slope or R slope

In the box are 4x 3pin and 4x 2pin female jumper cables that can be used to connect the UXSs switches to the headers on your modules

The module includes 4x DPDT push-switches connected to 2

With some distortion already applied

pins 15-16 and pins 17-18)

whichever best matches your country (please email us if you require a different plug to the country in your shipping address)

Each of the two gates has one input and two outputs

Inputting an up-edge/gate/trigger at the RESET jack simply resets the output clocks to start again from the first pulse

Jumpers on the board allow changing the 1/32 output to 1/64 and the 1/128 output to 1/256

pins 11-12